• TransiTempII-RH Data Logger

TransiTempII-RH Data Logger

  • Brands Madgetech
  • Product Code: PST-TRANSITEMPII-RH
  • Availability: In Stock
  • AU$267.50

    * Prices in this web site are excluding GST


Available Options


TEMPERATURE

Temperature Sensor Semiconductor
Temperature Range -40 °C to +80 °C (-40 °F to +176 °F)
Temperature Resolution 0.1 °C (0.18 °F)
Temperature Calibrated Accuracy ±0.5 °C (-10 °C to +40 °C)


HUMIDITY

Humidity Sensor Capacitive Polymer
Humidity Range 0 %RH to 100 %RH
Humidity Resolution 0.1 %RH
Humidity Calibrated Accuracy ±5 %RH (±3.5 %RH typical at 25 °C (77°F)) from 20 %RH to 80 %RH, +10 °C to +40 °C (+50 °F to +104 °F)


GENERAL

Memory 16,383 readings per channel
Reading Rate 1 reading every 5 seconds up to 1 reading every 30 minutes
Baud Rate 38,400
LED Indicators Red, Yellow, and Green
Push-Button Start Yes
Battery Life 1 year
Material ABS plastic, white, polycarbonate labeling
Dimensions 3.3 in x 2.1 in x 0.4 in (83 mm x 54 mm x 11 mm)
Operating Environment -40 °C to +80 °C (-4 °F to +176 °F), 0 %RH to 100 %RH non-condensing
Required Interface Package IFC300
Approvals Approved for carriage on Delta® Mainline Flights

TransiTempII-RH Data Logger

The TransiTempII-RH is a stand alone, rugged humidity and temperature data logger. This device is ideal for monitoring and recording the temperature and humidity of products during storage and shipping.

No external probes are required to achieve its high performance as both the temperature and humidity sensors are internal to the device. The TransiTempII-RH has a humidity resolution of 0.1% RH and typical accuracy of ±3.5% RH at 25°C. It can record up to 16,383 readings per channel.

The TransiTempII-RH is equipped with three status LED red/green/yellow indicators. It can be programmed through software to start immediately, delay start for up to 30 days, or be set to start using the magnetic switch. With the MadgeTech Data Logger software, the data can be displayed with a variety of different configurable options. Users have the ability to view temperature data in degrees Celsius, Fahrenheit, Kelvin or Rankine. Humidity readings can be displayed in %RH, water vapor concentration or even dew point. For additional analysis, data can be easily exported to MS Excel® by simply clicking a button.

Accessories
IFC300 - Interface cable package for the TransiTempII and Cryo-Temp Series Data Loggers. USB Connection with Docking Station Cradle.(Sold seperately)

Accessories

IFC300

IFC300

Interface cable package for the TransiTemp and Cryo-Temp Series Data Loggers. Includes MadgeTech Sof..

AU$204.00

WM-300

WM-300

The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp, LyoTemp, TransiTempI..

AU$72.00

Tags: transitempii-rh, data, logger, temperature