1300 662 720

Customer Support

1300 662 720

Customer Support

1300 662 720

Customer Support

Motor101A Data Logging System

The Motor101A is a data logging system to monitor the on/off status of motors.

Available on back-order

$ 636.00 Ex. GST

Share

Share on facebook
Share on twitter
Share on whatsapp
Share on email

The Motor101A Includes:
(1) State101A: State Data Logger
(1) Current Switch
(1) IFC200: Interface Cable

The Motor101A was designed to measure and record the on/off status changes for motors or other equipment drawing up to 200 Amps.

Just clamp the Motor101A to a wire and when the current passing through exceeds 150 mA the output changes, providing a voltage for the Motor101A to measure. This device can hold up to 825,753 readings, but memory will only be used if the status has changed.

The Motor101A is compatible with the latest MadgeTech 4 Software making starting, stopping, and downloading simple and easy. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.

General

Memory825,753 readings
Reading Rate4 Hz to 1 every 24 hours
Baud Rate115,200
LED IndicatorsRed & Green
Push-Button StartYes
Battery Life10 years typical
MaterialABS Plastic
DimensionsData Logger: 1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm)
Current Switch: 2.1 in x 3.5 in x 1.0 in (54 mm x 89 mm x 16 mm)
Operating Environment-15 °C to +40 °C (+5 °F to +104 °F), 10 %RH to 90 %RH non-condensing
Required Interface PackageIFC200
ApprovalsCE

 

State

State Resolution1 second (reading rate dependent)
Amperage Range0.15 to 200 Amps
Trip Point0.15 A (150 mA) fixed (200 mA AC for 50 Hz operation)
Status OutputN.O.1.0 A at 30 VAC/DC
HousingSplit Core

Motor101A Data Sheet

Motor101A Product User Guide